Welcome to the Windows 2000 Server MCQs Page

Dive deep into the fascinating world of Windows 2000 Server with our comprehensive set of Multiple-Choice Questions (MCQs). This page is dedicated to exploring the fundamental concepts and intricacies of Windows 2000 Server, a crucial aspect of Operating System. In this section, you will encounter a diverse range of MCQs that cover various aspects of Windows 2000 Server, from the basic principles to advanced topics. Each question is thoughtfully crafted to challenge your knowledge and deepen your understanding of this critical subcategory within Operating System.

Check out the MCQs below to embark on an enriching journey through Windows 2000 Server. Test your knowledge, expand your horizons, and solidify your grasp on this vital area of Operating System.

Note: Each MCQ comes with multiple answer choices. Select the most appropriate option and test your understanding of Windows 2000 Server. You can click on an option to test your knowledge before viewing the solution for a MCQ. Happy learning!

Windows 2000 Server MCQs | Page 2 of 6

Explore more Topics under Operating System

01

Introduction to Operating Systems

02

OS Basics

03

System Calls

04

Processes and Threads

05

CPU Scheduling

06

Process Synchronization

07

Deadlocks

08

Files Management

09

Storage Management

10

Mass Storage Structure

11

IO Systems

12

Protection and Security

13

Distributed Systems

14

Real Time Systems

15

Swapping

16

Virtual Memory

17

Page Replacement Algorithms

18

File System Implementation

19

Files and Directories

20

Linux System

21

Disk Operating System (DOS)

22

Unix System

23

Windows NT

24

Windows Operating System

Q11.

Computer accounts and user accounts in your domain have been seperated into OUs for administrative purpose. You want to require strong passwords for the local user accounts only. What should you do?

Set a Group Policy on each local computer to enable the passwords must meet complexity requirements policy

Set a Group Policy on the domain to enable the passwords must meet complexity requirements policy

Set a Group Policy on all OUs containing computer accounts to enable the passwords must meet complexity requirements policy

Set a Group Policy on all OUs containing user accounts to enable the passwords must meet complexity requirements policy

Discuss

Answer: (a).Set a Group Policy on each local computer to enable the passwords must meet complexity requirements policy

Q12.

You are the network administrator for your company. Mike Nash is a member of the Administration group, and Nate Sun is a member of the Intern group. Both groups are in the same domain. On the intranet server, the Administration group is placed in the Security group, and the Intern group is placed in the Nonsecurity group. The Security group is then granted Full Control permission for the Sales virtual directory. Nate needs to update new sales information that is located on the Sales virtual directory. What should you do so that Nate can perform this task?

Enable Anonymous access for the intranet server

Enable Anonymous access for the Sales virtual directory

Remove Nate fmm the Intern group

Make Nate a member of the Security group

Discuss

Answer: (d).Make Nate a member of the Security group

Q13.

You are the administrator of a Windows 2000 Server computer that has one hard disk. This computer runs a custom application that writes a large number of small temporary files in a single directory to support request from client computers. To improve performance of the application, you add three new 100-GB SCSI disks to the server to hold these temporary files. You want to ensure that the application can use all 300 GB of space with a single drive letter. You also want to ensure the fastest possible performance when writing the temporary files. How should you configure the three disks?

Convert all three disks to dynamic disks. Create a striped volume

Convert all three disks to dynamic disks. Create a RAID-5 volume

Create a single volume on each of the three disks. Format each volume as NTFS. Mount the roots of Disk 2 and Disk 3 in the root folder of Disk 1

Create a single volume on Disk 1. Format the volume as NTFS. Extend the volume to create a spanned volume that includes the space on all three disks

Discuss

Answer: (a).Convert all three disks to dynamic disks. Create a striped volume

Q14.

You are the administrator of Windows 2000 Server computer. Your computer has a span volume that consists of areas on three physical hard disks on the server. The three disks support hot swapping. You regularly backup the span volume by using windows backup. One of the disk fail, you replace the disk with a new un-partitioned disk. You want to recover the span volume and disk data as soon as possible. What should you do?

Extend the span volume to include the new disk, rescan the disk

Extend the span volume to include the new disk, shut down and restart the server, use windows backup to restore the data

Re scan the disk, format the span volume. Use windows back up to restore the data

Re scan the disk, remove the span volume and create a new span volume that includes the new disk. Format the span volume, use Windows back up to restore the data

Discuss

Answer: (d).Re scan the disk, remove the span volume and create a new span volume that includes the new disk. Format the span volume, use Windows back up to restore the data

Q15.

You have configured a Group Policy Object (GPO) for the marketing oranization unit (OU) to prevent users from accessing My Network Places and from running System in Control Panel. You want the Managers Domain Local Group to be able to access My Network Places, but you still want to prevent them from running System in Control Panel. What should you do?

Add the Managers group to the access control list of the GPO. Disable the permission of the managers group to read and apply the Group Policy

Add the Managers group to the access control list of the GPO. Deny the permission of the managers group to read and apply the Group Policy

Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Deny the Authenticated Users group permission to read and apply the Group Policy. Configure the new GPO to deny the ability to run system Control Policy Panel. Give the original GPO a higher priority than the new GPO

Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Disable the Authenticated Users group permission to read and apply the Group Policy. Configure the new GPO to allow access to My Network Places. Give the original GPO a higher priority than the new GPO

Discuss

Answer: (d).Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Disable the Authenticated Users group permission to read and apply the Group Policy. Configure the new GPO to allow access to My Network Places. Give the original GPO a higher priority than the new GPO

Q16.

You install the Routing and Remote Access service on a Windows 2000 Server computer in your network. Your network is not directly connected to the Internet and uses the private IP address range 192.168.0.0. When you use Routing and Remote Access to dial in to the server, your computer connects successfully, but you are unable to access any resources. When you try to piiig servers by using their IP addresses, you receive the following message: "Request timed out." When you run the ipconfig command, it shows that your dial-up connection has been given the IP address 169.254.75.182. What should you do to resolve the problem?

Configure the remote access server with the address of a DHCP server

Authorize the remote access server to receive multiple addresses from a DHCP server

Configure the remote access server to act as a DHCP Relay Agent

Ensure that the remote access server is able to connect to a DHCP server that has a scope for its subnet

Discuss

Answer: (d).Ensure that the remote access server is able to connect to a DHCP server that has a scope for its subnet

Q17.

You configure your Windows 2000 Server as a print server. You install a second PnP Network adapter to improve the performance. The first adapter uses IRQ11, and the second adapter uses IRQ5. The server is now unable to print to print devices connected to a non-PnP LPT2 port adapter. You want to continue to use the print devices connected to your print server. What should you do?

Use device manager to change the IRQ for LPT1 to IRQ10

Use device manager to change the IRQ for LPT2 to IRQ7

Edit the CMOS setting of the servers BIOS to reserve IRQ7 for non-PnP devices

Edit the CMOS setting of the servers BIOS to reserve IRQ5 for non-PnP devices

Discuss

Answer: (d).Edit the CMOS setting of the servers BIOS to reserve IRQ5 for non-PnP devices

Q18.

Your computer has a mirrored volume and you wish to now install the Recovery Console for future troubleshooting. How do you do this?

Reinstall Windows, this can only be applied during the installation

Break the mirror, run X:\i386\winnt32.exe /cmdcons Reestablish the mirror

Run X:\i386\winnt32.exe / cmdcons

Run the add and remove programs and add the recovery console

Discuss

Answer: (b).Break the mirror, run X:\i386\winnt32.exe /cmdcons Reestablish the mirror

Q19.

Your Windows 2000 Server computer uses a non-Plug and Play ISA modem configured to use IRQ 5. You add a PCI modem and restart the computer. Device Manager reports an IRQ conflict between the two modems. Both modem are trying to use IRQ 5. You want to resolve the problem. What should you do?

Use Device Manager to change the IRQ for the original modem to IRQ 9

Use Device Manager to change the IRQ for the original modem to IRQ 10

Edit the CMOS settings on the computer to reserve IRQ 5 for non-Plug and Play devices

Edit the CMOS settings on the computer to reserve IRQ 10 for non-Plug and Play devices

Discuss

Answer: (c).Edit the CMOS settings on the computer to reserve IRQ 5 for non-Plug and Play devices

Q20.

Your network contains NetWare 4.0 Servers. You have successfully installed Client Service for NetWare on Windows 2000 Professional computers, and Gateway Service for NetWare on Windows 2000 Server Computers. You recently added a new Windows 2000 Server computer to the network and installed Gateway Service for NetWare on it. However, the server is unable to connect to any NetWare servers. What should you do on the new Windows 2000 Server computer to resolve this problem?

Enable NWLink NetBIOS

Configure the NWLink IPX/SPX/ NetBIOS Compatible Transport Protocol to use the correct Ethernet frame type

Install RIP routing for IPX

Install the SAP Agent

Discuss

Answer: (b).Configure the NWLink IPX/SPX/ NetBIOS Compatible Transport Protocol to use the correct Ethernet frame type

Page 2 of 6

Welcome to the Windows 2000 Server MCQs Page

Windows 2000 Server MCQs | Page 2 of 6

Explore more Topics under Operating System

Introduction to Operating Systems

OS Basics

System Calls

Processes and Threads

CPU Scheduling

Process Synchronization

Deadlocks

Files Management

Storage Management

Mass Storage Structure

IO Systems

Protection and Security

Distributed Systems

Real Time Systems

Swapping

Virtual Memory

Page Replacement Algorithms

File System Implementation

Files and Directories

Linux System

Disk Operating System (DOS)

Unix System

Windows NT

Windows Operating System

Suggested Topics

Software Architecture and Design

R Programming

Compiler Design

Management Information Systems

JavaScript

Formal Languages and Automata Theory

Human Computer Interaction

Systems Analysis and Design Methods

Wireless and Mobile Communications