adplus-dvertising

Welcome to the Windows 2000 Server MCQs Page

Dive deep into the fascinating world of Windows 2000 Server with our comprehensive set of Multiple-Choice Questions (MCQs). This page is dedicated to exploring the fundamental concepts and intricacies of Windows 2000 Server, a crucial aspect of Operating System. In this section, you will encounter a diverse range of MCQs that cover various aspects of Windows 2000 Server, from the basic principles to advanced topics. Each question is thoughtfully crafted to challenge your knowledge and deepen your understanding of this critical subcategory within Operating System.

frame-decoration

Check out the MCQs below to embark on an enriching journey through Windows 2000 Server. Test your knowledge, expand your horizons, and solidify your grasp on this vital area of Operating System.

Note: Each MCQ comes with multiple answer choices. Select the most appropriate option and test your understanding of Windows 2000 Server. You can click on an option to test your knowledge before viewing the solution for a MCQ. Happy learning!

Windows 2000 Server MCQs | Page 1 of 6

Explore more Topics under Operating System

Q1.
You are the administrator of a Windows 2000 Server computer that has FIVE hard disks. Four 100 GB hard disks on the server are configured as a single stripe volume. You want to reconfigure the fourth disk so that the volume is fault tolerant and has as much space possible available for storing data. You want to use only existing hardware. What should you do?

a.

Convert the disk to dynamic disk shut doWn and restart the server

b.

Backup the data on the stripe volume and delete the stripe volume. Create a raidS volume on the four disks, restore the data to the new raid5 volume

c.

Backup the data on the stripe volume and delete the stripe volume. Create a mirror volume, shut down and restart the server. Restore the data to new mirror volumes

d.

Backup the data on the stripe volume and delete the stripe

Discuss
Answer: (b).Backup the data on the stripe volume and delete the stripe volume. Create a raidS volume on the four disks, restore the data to the new raid5 volume
Q2.
You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer. Your Windows 2000 Professional client computers can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit. "The server on which the printer resides does not have a suitable HP LaserJet printer driver installed". You want the printer driver to be installed automatically on the Windows NT Workstation computers. What should you do?

a.

Copy the Windows NT 4.0 Printer Drivers to the Net logon shared folders on all Windows NT Server 4.0 computers still configured as BDCs

b.

Copy the Windows NT 4.0 printer drivers to the Net logon shared folder on the PDC emulator

c.

Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000

d.

Copy the Windows NT 4.0 printer drivers to the Winnt\System32\ pri liter s\dri vers folder on the Windows 2000 print server

Discuss
Answer: (c).Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000
Q3.
Your company's network includes Windows 3.1 client computers, Windows 95 client computers, and Windows 2000 Professional client computers. The company's manufacturing facilities run 24 hours per day. The company has developed its own 32-bit application that collects information from the manufacturing process so that workers on one shift can find out that was manufactured during the previous shift. The company wants to make the application available on all of the client computers by using Terminal Service on a Windows 2000 Server computer. This server will not run as a domain controller. You install Terminal Services. The information technology (IT) department needs to be able to remote control users' sessions to support and troubleshoot the application. What should you do to enable the IT department to control users' sessions?

a.

Configure the Terminal server to run in Remote Administration mode

b.

Grant the IT department Full Control permission to the Remote Desktop Protocol (RDP) on the Terminal server

c.

Add the members of the IT department to the Power Users group on the Terminal server

d.

Use third-party software to enable remote control of users' sessions

Discuss
Answer: (b).Grant the IT department Full Control permission to the Remote Desktop Protocol (RDP) on the Terminal server
Q4.
You are the administrator of contoso.local domain. You organize the domain into organizational units as shown in the EXHIBIT. You configure the local security options and other settings for the default domain policy object You delegate administration of Michigan and Florida OU. You want to prevent those administrators from creating any other group policy objects with settings that conflict with those you configured.What should you do?

a.

From the group policy options from the contoso.local domains set the option not override

b.

From the group policy options from the Michigan and Florida OU, set the option not override

c.

Block the group policy inheritance for the contoso.local domain

d.

Block the group policy inheritance for Michigan and Florida OU

Discuss
Answer: (a).From the group policy options from the contoso.local domains set the option not override
Q5.
You are the administrator of a Windows 2000 Server computer. The server contains one network adapter and is a file and print server for critical company resources. You install a second network adpater in the server and connect it to the same network subnet as the first adapter. You want to ensure that the first adapter is used for all network traffic and the second adapter is used only if the first adapter fails or is disconnected from the network. You also want to ensure that the server always has network connectivity even if one network adapter fails. What should you do?

a.

Set the second adapters status to disable

b.

Configure the first adapter to use a TCP/IP metric of 100

c.

Configure the second adapter to use a TCP/IP metric of 25

d.

Configure the binding order on the second adapter to bind TCP/IP last

Discuss
Answer: (c).Configure the second adapter to use a TCP/IP metric of 25
Q6.
You are the administrator of a Windows 2000 domain that has three domain controllers. Each day, you use Windows Backup to perform full backups of each domain controller. You run a script to make changes to account information in Active Directory. As a result of errors in the script, the incorrect user accounts are modified. Active Directory replication then replicates the changes to the other two domain controllers. You want to revert Active Directory to the version that was backed up the previous day. What should you do?

a.

On a single domain controller, use Windows Backup to restore the System State data. Shut down and restart the computer

b.

Shut down and restart a single domain controller in directory services restore mode. Use Windows Backup to restore the System State data. Run the Ntdsutil utility. Restart the computer

c.

Shut down, and restart a single domain controller by using the Recovery Console. Use Windows Backup to restore the System State data. Exit the Recovery Console. Restart the computer

d.

Shut down and restart each domain controller by using the Recovery Console. Use Windows Backup to restore the Sysvol folder. Exit the Recovery Console. Restart the computer

Discuss
Answer: (b).Shut down and restart a single domain controller in directory services restore mode. Use Windows Backup to restore the System State data. Run the Ntdsutil utility. Restart the computer
Q7.
Your network uses TCP/IP as the only network protocol. Devices on the network are configured to use IP address from the private 10.0.0.0 range. All the client computers on the network runs Windows 2000 Professional. The network includes Windows 2000 Server computers and UNIX servers. User's print jobs are sent to shared printers on a Windows 2000 Server computer named PrintServ that directs the print jobs to print devices attached directly to the network. You have a high-capacity print device that is attached to one of the UNIX servers. The UNIX computer uses the LPR printing protocol, and it's IP address is 10.1.1.99. The name of the printer queue is GIANT. You want users to be able to connect to this printer from their computers. What should you do?

a.

Install Microsoft Print Services for Unix on PrintServ. Create a network printer on users' computers, and specify that the printer URL is LPR://10.1.1.99/ GIANT

b.

Install Microsoft Print Services for Unix on users* Computers. Create a network printer, and specify that the printer name is \\10.1.1.99\GIANT

c.

Create a network printer on PrintServ, and specify that the printer name is \\16.1.1.99\GIANT. Share this printer and connect to it from users computers

d.

Create a local printer on PrintServ. Create a new TCP/IP port for an LPR server at address 10.1.1.99 with a queue name of GIANT. Share this printer and connect to it from users' computers

Discuss
Answer: (d).Create a local printer on PrintServ. Create a new TCP/IP port for an LPR server at address 10.1.1.99 with a queue name of GIANT. Share this printer and connect to it from users' computers
Q8.
You are the administrator of a Windows 2000 Server computer. The server hosts several web sites that have logging enabled. You use a third-party reporting utility to analyze the log files produced by the web sites. You notice that all data from 7:00pm to midnight each night is included in the following day's logfile. You want all data to be included in the correct day's log file. What should you do?

a.

Ensure that the log type is set to W3C

b.

Change the log rollover property in the website's logging properties

c.

Change the time zone setting in the time properties on the web server

d.

Configure the time service on the web server to use local system account

Discuss
Answer: (b).Change the log rollover property in the website's logging properties
Q9.
You are the administrator responsible for security and user desktop settings on your network. You need to configure a custom registry entry for all users. You want to add the custom registry entry into a Group Policy object (GPO) with the least amount of administrative effort What should you do?

a.

Configure an ADM template and add the template to the GPO

b.

Configure,an INF policy and add the policy to the GPO

c.

Configure a Microsoft Windows Installer package and add the package to the GPO

d.

Configure RIS to include the registry entry

Discuss
Answer: (a).Configure an ADM template and add the template to the GPO
Q10.
You want to provide complete redundancy for all data stored on your hardware RAID 5 array. You install second h/w Raid 5. You want to create a mirror set of the original array. However when you right click the free space on new array you see no option to create a new volume or mirrrored volume. What should you do?

a.

Convert both to dynamic disks

b.

Create an empty extended partition on new disk

c.

Create a single unformatted primary partition on new array

d.

Format new disk array as a single NTFS primary partition

Discuss
Answer: (a).Convert both to dynamic disks
Page 1 of 6

Suggested Topics

Are you eager to expand your knowledge beyond Operating System? We've curated a selection of related categories that you might find intriguing.

Click on the categories below to discover a wealth of MCQs and enrich your understanding of Computer Science. Happy exploring!

Cryptography and Network Security

Secure your knowledge of information security with our Cryptography and Network...

MongoDB

Learn the leading NoSQL database with our MongoDB MCQs. Understand everything from...

Compiler Design

Unravel the process of translating source code into executable programs with our...

Object Oriented Programming

Enhance your coding skills with our Object Oriented Programming MCQs. Understand...

Visual Basic

Enhance your knowledge of Microsoft's event-driven programming language with our...

JavaScript

Strengthen your web development skills with our JavaScript MCQs. Understand core...

Discrete Mathematics

Refine your mathematical skills essential for computer science with our Discrete...

MATLAB

Hone your computational mathematics skills with our MATLAB MCQs. Understand...

CSS

Polish your web design skills with our CSS MCQs. Learn about selectors, properties,...