Question
a.
the CPU uses polling to watch the control bit constantly, looping to see if device is ready
b.
the CPU writes one data byte to the data register and sets a bit in control register to show that a byte is available
c.
the CPU receives an interrupt when the device is ready for the next byte
d.
the CPU runs a user written code and does accordingly
Posted under Operating System
Engage with the Community - Add Your Comment
Confused About the Answer? Ask for Details Here.
Know the Explanation? Add it Here.
Q. In a programmed input/output(PIO) :
Similar Questions
Discover Related MCQs
Q. In an interrupt driven input/output :
View solution
Q. In the layered approach of Operating Systems :
View solution
Q. How does the Hardware trigger an interrupt ?
View solution
Q. Which operation is performed by an interrupt handler ?
View solution
Q. Why is the Software interrupt required by the processor?
View solution
Q. Match the following list1 with list2:
a. DMA I/O -------------------------------------- 1. High speed RAM
b. Cache ---------------------------------------- 2. Disk
c. Interrupt I/O --------------------------------- 3. Printer
d. Condition code register ------------------- 4. ALU
View solution
Q. Which of the following is an example of Spooled Device?
View solution
Q. The following is not a layer of IO management module
View solution
Q. If one or more devices use a common set of wires to communicate with the computer system, the connection is called ______
View solution
Q. A ____ a set of wires and a rigidly defined protocol that specifies a set of messages that can be sent on the wires.
View solution
Q. When device A has a cable that plugs into device B, and device B has a cable that plugs into device C and device C plugs into a port on the computer, this arrangement is called a _________
View solution
Q. The _________ present a uniform device-access interface to the I/O subsystem, much as system calls provide a standard interface between the application and the operating system.
View solution
Q. A ________ is a collection of electronics that can operate a port, a bus, or a device.
View solution
Q. An I/O port typically consists of four registers status, control, ________ and ________ registers.
View solution
Q. The ______ register is read by the host to get input.
View solution
Q. The ______ register is written by the host to send output.
View solution
Q. The hardware mechanism that allows a device to notify the CPU is called _______
View solution
Q. The CPU hardware has a wire called __________ that the CPU senses after executing every instruction.
View solution
Q. The _________ determines the cause of the interrupt, performs the necessary processing and executes a return from the interrupt instruction to return the CPU to the execution state prior to the interrupt.
View solution
Q. In general the two interrupt request lines are :
View solution
Suggested Topics
Are you eager to expand your knowledge beyond Operating System? We've curated a selection of related categories that you might find intriguing.
Click on the categories below to discover a wealth of MCQs and enrich your understanding of Computer Science. Happy exploring!
