Q. The IOW (active low) in its slave mode loads the contents of a data bus to

View solution

Q. To indicate the I/O device that its request for the DMA transfer has been honored by the CPU, the DMA controller pulls

View solution

Q. The number of clock cycles required for an 8257 to complete a transfer is

View solution

Q. The block of 8237 that decodes the various commands given to the 8237 by the CPU is

View solution

Q. The priority between the DMA channels requesting the services can be resolved by

View solution

Q. The register that holds the current memory address is

View solution

Q. The register that holds the data byte transfers to be carried out is

View solution

Q. When the count becomes zero in the current word register then

View solution

Q. The current address register is programmed by the CPU as

View solution

Q. Which of these register’s contents is used for auto-initialization (internally)?

View solution

Q. The register that maintains an original copy of the respective initial current address register and current word register is

View solution

Q. The register that can be automatically incremented or decremented, after each DMA transfer is

View solution

Q. Which of the following is a type of DMA transfer?

View solution

Q. Each bit in the request register is cleared by

View solution

Q. The register that holds the data during memory to memory data transfer is

View solution

Q. The register that keeps track of all the DMA channel pending requests and status of their terminal counts is

View solution

Q. The pin that clears the command, request and temporary registers, and internal first/last flipflop when it is set is

View solution

Q. The DMA request input pin that has the highest priority is

View solution

Q. When interface 8237 does not have any valid pending DMA request then it is said to be in

View solution

Q. To complete a DMA transfer, a memory to memory transfer requires

View solution