Q. In ................... transmission, the channel capacity is shared by both communicating devices at all times.

View solution

Q. What are the most commonly used transmission speeds in BPS used in data communication?

View solution

Q. To connect a computer with a device in the same room, you might be likely to use

View solution

Q. Usually, it takes 10-bits to represent one character. How many characters can be transmitted at a speed of 1200 BPS?

View solution

Q. Avalanche photodiode receivers can detect hits of transmitted data by receiving

View solution

Q. Satellite-Switched Time-Division Multiple Access (SS/TDMA) is

View solution

Q. Carrier is

View solution

Q. A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate?

View solution

Q. The slowest transmission speeds are those of

View solution

Q. The receive equalizer reduces delay distortions using a

View solution

Q. If digital data rate of 9600 bps is encoded using 8-level phase shift keying (PSK) method, the modulation rate is

View solution

Q. Which of the following is a voice band channel?

View solution

Q. What are the data transmission channels available for carrying data from one location to another?

View solution

Q. What frequency range is used for FM radio transmission?

View solution

Q. If delays are recorded as 10 bit numbers in a 50 router network, and delay vectors are exchanged twice a second, how much bandwidth per fill duplex line is occupied by the distributed routing algorithm?

View solution

Q. Bandlimited signal is

View solution

Q. Identify the odd term amongst the following group:

View solution

Q. The signal to noise ratio for a voice grade line is 30.1 dB (decibels) or a power ratio of 1023:1. The maximum achievable data rate on this line whose spectrum ranges from 300 Hz to 4300 Hz is

View solution

Q. The encoding method specified in the EIA-232 standard is _____.

View solution

Q. The transmission signal coding method of TI carrier is called

View solution