Q. ................ does not provide any form of authentication.

View solution

Q. The mean delay of static channel allocation in LANS and MANS using FDM is ...............

View solution

Q. How many class A, B and C networks IDs can exist?

View solution

Q. Which of the following TCP/IP internet protocol, a diskless machine uses to obtain its IP address from a server?

View solution

Q. Fragmentation means ...................

View solution

Q. Bridges are used at ................ layer.

View solution

Q. The address field of a frame in HDLC protocol contains the address of the .................. station.

View solution

Q. While booting the system the IP address is ................

View solution

Q. How many digits of the DNIC (Data Network Identification Code) identify the country?

View solution

Q. What is the default subnet mask for a class C network?

View solution

Q. With an IP address of 100, you currently have 80 subnets. What subnet mask should you use to maximize the number of available hosts?

View solution

Q. When you ping the loopback address, a packet is sent where?

View solution

Q. What part of 192.168.10.51 is the Network ID, assuming a default subnet mask?

View solution

Q. Which address is the loopback address?

View solution

Q. Four routers have to be interconnected in a point-to-point Network. Each pair of root us may connected by a high-speed line, a medium speed line or a low speed line. Find the total number of topologies.

View solution

Q. HMP (Host Monitoring Protocol) is:

View solution

Q. You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and 192.168.7.0. What subnet mask can you use to combine these addresses into one?

View solution

Q. On a class B network, how many hosts are available at each site with a subnet mask of 248?

View solution

Q. Which of the following best illustrates the default subnet mask for a class A,B, and C Network?

View solution

Q. You are working with a network that has the network ID 192.168.10.0. What subnet should you use that supports up to 25 hosts and a maximum number of subnets?

View solution