Q. HMP (Host Monitoring Protocol) is:

View solution

Q. You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and 192.168.7.0. What subnet mask can you use to combine these addresses into one?

View solution

Q. On a class B network, how many hosts are available at each site with a subnet mask of 248?

View solution

Q. Which of the following best illustrates the default subnet mask for a class A,B, and C Network?

View solution

Q. You are working with a network that has the network ID 192.168.10.0. What subnet should you use that supports up to 25 hosts and a maximum number of subnets?

View solution

Q. Which of the following statement is incorrect?

View solution

Q. How many digits of the Network User Address are known as the DNIC (Data Network Identification Code)?

View solution

Q. What is the first octet range for a class C IP address?

View solution

Q. Because the configuration infor-mation for a DHCP client is received dynamically, you must use which utility to read the current configuration to verify the settings?

View solution

Q. Which of the following is separated by a subnet mask?

View solution

Q. You have a network ID of 192.168.10.0 and require at least 25 host IDs for each subnet, with the largest amount of subnets available. Which subnet mask should you assign?

View solution

Q. How many class A, B, and C network IDs can exist?

View solution

Q. You are working with a network that has the network ID 192.168.10.0 and require nine subsets for your company and the maximum number of hosts. What subnet mask should you use?

View solution

Q. HDLC (High-level Data Link Control) is

View solution

Q. On a class C network with a subnet mask of 192, how many subnets are available?

View solution

Q. Which IP address class has few hosts per network?

View solution

Q. When using the loopback address, if TCP/IP is installed correctly, when should you receive a response?

View solution

Q. What is the default subnet mask for a class A network?

View solution

Q. Which of the following best describes the scopes on each DHCP server, in the absence of configuration problems with DHCP addresses, if you use multiple DHCP servers in your environment?

View solution

Q. RS-232-G

View solution