Q. Each station on an Ethernet network has a unique _______ address imprinted on its network interface card (NIC).

View solution

Q. The minimum frame length for 10-Mbps Ethernet is _______bytes.

View solution

Q. The maximum frame length for 10-Mbps Ethernet is ________ bytes.

View solution

Q. _________ uses thick coaxial cable.

View solution

Q. __________ uses thin coaxial cable.

View solution

Q. _________ uses four twisted-pair cables that connect each station to a common hub.

View solution

Q. ________ uses fiber-optic cable.

View solution

Q. Fast Ethernet has a data rate of ________Mbps.

View solution

Q. Gigabit Ethernet access methods include _______ mode.

View solution

Q. In Ethernet addressing, if the least significant bit of the first byte is 0, the address is _________.

View solution

Q. In Ethernet addressing, if the least significant bit of the first byte is 1, the address is _________.

View solution

Q. In Ethernet addressing, if all the bits are 1s, the address is _________.

View solution

Q. ______defines a protocol data unit (PDU) that is somewhat similar to that of HDLC.

View solution

Q. The purpose of the _______ is to provide flow and error control for the upper-layer protocols that actually demand these services.

View solution

Q. In the Ethernet, the _______field is actually added at the physical layer and is not (formally) part of the frame.

View solution

Q. In the Ethernet frame, the _______ field contains error detection information.

View solution

Q. Standard Ethernet (10-Mbps) uses _______ encoding.

View solution

Q. 100Base-TX uses _________ block coding and ________ line coding.

View solution

Q. 100Base-FX uses _________ block coding and ________ line coding.

View solution

Q. 100Base-T4 uses ________ line coding.

View solution