Q. What is the basic data rate (Minimum data rate) in an EV-DO network?

View solution

Q. In a CDMA2000 1xEV-DO network, Forward channels always transmit at ____ power.

View solution

Q. Forward channels in a CDMA2000 1xEV-DO transmit data at ___ rate.

View solution

Q. In an EVDO network, which selects a possible highest data rate between AT and AN?

View solution

Q. In an EVDO network, all users of the same Sector share ___ in a TDMA mode.

View solution

Q. Selecting a data rate for a Forward Channel or Reverse Channel is based on the ___ Ratio.

View solution

Q. What is the maximum data rate of a Forward Channel?

View solution

Q. State TRUE or FALSE.
CDMA2000 1x and CDMA2000 1xEV-DO have different channel structure.

View solution

Q. What is the maximum data rate of an EV-DO Reverse Channel?

View solution

Q. CDMA2000 1xEV-DO follows ___ power control for Reverse channels.

View solution

Q. What is the advantage of Reverse Link Power Control (Dynamic power control)in an EVDO network?

View solution

Q. What are the techniques or mechanisms followed to avoid too many users transmitting at a high data rate towards the AN (Access Node or BTS) and crashing the system?

View solution

Q. How many different data rates which are multiples of 38.4 kbps are available in an EVDO network?

View solution

Q. What are the possible data rates available in a CDMA2000 1xEV-DO network?

View solution

Q. What is the Multiplexing technique followed by an 1xEV-DO network?

View solution

Q. EVDO implements Time Division Multiplexing for its ___ Links.

View solution

Q. In a 1xEV-DO network, Reverse Links are implemented with ___ multiplexing.

View solution

Q. The process of Scheduling forward link data to all users aiming to achieve maximum throughput is called?

View solution

Q. After measuring C/I (Carrier to Interference Ratio), AT (Mobile) informs to AN (BTS) about the acceptable highest data rate through ___ channel.

View solution

Q. What is the name of Soft Handoff in which the Mobile Station (AT - Access Terminal) does not exchange any signalling with AT to move from one Sector to the other Sector for good data rate?

View solution