adplus-dvertising
frame-decoration

Question

__________ augments the CSMA algorithm to detect collision.

a.

CSMA/CA

b.

CSMA/CD

c.

either (a) or (b)

d.

both (a) and (b)

Posted under Networking

Answer: (b).CSMA/CD

Engage with the Community - Add Your Comment

Confused About the Answer? Ask for Details Here.

Know the Explanation? Add it Here.

Q. __________ augments the CSMA algorithm to detect collision.

Similar Questions

Discover Related MCQs

Q. In ________, a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frame is sent again.

Q. To avoid collisions on wireless networks, ________was invented.

Q. In _______, collisions are avoided through the use of three strategies: the interframe space, the contention window, and acknowledgments.

Q. In _______ methods, the stations consult one another to find which station has the right to send.

Q. In _______ methods, a station cannot send unless it has been authorized by other stations.

Q. There are ______ popular controlled-access methods.

Q. In the ________ method, a station needs to make a reservation before sending data. Time is divided into intervals.

Q. In the _____ method, time is divided into intervals. In each interval, a reservation frame precedes the data frames sent in that interval.

Q. In the ______ method, all data exchanges must be made through the primary device even when the ultimate destination is a secondary device.

Q. In the _______ method, the primary device controls the link; the secondary devices follow its instructions.

Q. In the _______ method, the stations in a network are organized in a logical ring.

Q. In the _______ method, each station has a predecessor and a successor.

Q. In the _________ method, a special packet called a ______ circulates through the ring.

Q. _________ is a multiple-access method in which the available bandwidth of a link is shared in time, frequency, or through code, between different stations.

Q. There are ________ channelization protocols.

Q. In ________, the available bandwidth is divided into frequency bands.

Q. In ______, each station is allocated a band to send its data. In other words, each band is reserved for a specific station, and it belongs to the station all the time.

Q. In _______, the stations share the bandwidth of the channel in time.

Q. In _____, each station is allocated a time slot during which it can send data. Each station transmits its data in its assigned time slot.

Q. In _____, each station transmits its data in its assigned time slot.