Q. P2CA4-P2CA0 bits are used for

View solution

Q. CAREFx bits are used for

View solution

Q. Which of the following bits are not actually associated with the comparator module.

View solution

Q. Flag CAIFG is raised,

View solution

Q. Setting a bit in the Port Disable register CAPD causes the circuits for the usual digital input and output buffers to be disconnected from the appropriate pin.

View solution

Q. Which bit is used for exchanging the two inputs of the comparator and invert its output to compensate?

View solution

Q. Changes in Vcc changes the value of V+ ?

View solution

Q. The relaxation oscillator circuit helps in

View solution

Q. The successive approximation converters have resolution of

View solution

Q. In SAR based conversions, each bit typically requires one clock cycle (sometimes two) to make a comparison and set up the new voltage.

View solution

Q. The main operations that are basically performed in a SAR ADC are?

View solution

Q. Usually a capacitor is inserted between an analog input and the ground because

View solution

Q. ADC10 and ADC12 are

View solution

Q. ADC10 needs external capacitors on its voltage reference.

View solution

Q. ADC10CTL0 and ADC10CTL1 are registers

View solution

Q. While conversion is in progress, which of the flag is affected.

View solution

Q. ADC10SHTx bits allow_________cycles of the ADC10CLK.

View solution

Q. The input to the ADC10 is selected from_______bits of the ADC10CTL1 register?

View solution

Q. The basic idea behind the sigma delta converter is that

View solution

Q. Sigma delta converter is a

View solution