adplus-dvertising
frame-decoration

Question

A network using CSMA/CD has a bandwidth of 10 Mbps. If the maximum propagation time (including the delays in the devices and ignoring the time needed to send a jamming signal, as we see later) is 25.6 μs, what is the minimum size of the frame?

a.

128 bytes

b.

32 bytes

c.

16 bytes

d.

64 bytes

Answer: (d).64 bytes

Engage with the Community - Add Your Comment

Confused About the Answer? Ask for Details Here.

Know the Explanation? Add it Here.

Q. A network using CSMA/CD has a bandwidth of 10 Mbps. If the maximum propagation time (including the delays in the devices and ignoring the time needed to send a jamming signal, as...

Similar Questions

Discover Related MCQs

Q. A slotted ALOHA network transmits 200-bit frames using a shared channel with a 200-kbps bandwidth. Find the throughput if the system (all stations together) produces 500 frames per second.

Q. A slotted ALOHA network transmits 200-bit frames using a shared channel with a 200-kbps bandwidth. Find the throughput if the system (all stations together) produces 1000 frames per second.

Q. A pure ALOHA network transmits 200-bit frames on a shared channel of 200 kbps. What is the throughput if the system (all stations together) produces 250 frames per second?

Q. A pure ALOHA network transmits 200-bit frames on a shared channel of 200 kbps. What is the throughput if the system (all stations together) produces 500 frames per second?

Q. A pure ALOHA network transmits 200-bit frames on a shared channel of 200 kbps. What is the throughput if the system (all stations together) produces 1000 frames per second?

Q. After performing bit stuffing on the following stream : 01101111111111111110010, the output is-

Q. Find the distance from source A to destination D using Dijkstra algorithm.

Q. Find the distance from source A to destination D using Dijkstra algorithm.

Q. A pure ALOHA network transmits 200-bit frames on a shared channel of 200 kbps. What is the requirement to make this frame collision-free?

Q. Fiber Distributed Data Interface (FDDI) and Copper Distributed Data Interface (CDDI) uses

Q. In Frequency Division Multiple Access, the data link layer in each station tells its physical layer to make

Q. When a station needs to make a reservation before sending data then it is called the

Q. If the station has been authorized by other stations then a station can

Q. FDMA, TDMA and CDMA are

Q. The collision may result in

Q. In Frequency Division Multiple Access, the bandwidth of each channel is shifted by the

Q. The type which improves the efficiency of pure ALOHA is

Q. In token passing method, the station can send data when it receives the

Q. During collisions in the wired network, the detecting energy is almost

Q. The number of sequences in a Walsh table i.e. N=