Q. All ATM stations have

View solution

Q. Frame Relay operates in

View solution

Q. To allow ATM to connect existing digital telephone networks such as voice channels and T lines, we use

View solution

Q. A Transmission Path (TP) is the physical connection between an endpoint and a

View solution

Q. The protocol that is added recently to the Frame Relay protocol to provide more management features is called

View solution

Q. In ATM, if none of the channels has cell to send then the slot is

View solution

Q. To route data from one endpoint to another, the virtual connections need to be identified in

View solution

Q. The value of the Ending tag in the Convergence Sub layer (CS) of AAL3/4) is the same as the

View solution

Q. In a mixed architecture, a station connected to a legacy LAN must be able to communicate with a station directly connected to an ATM switch is called

View solution

Q. In cell network, A cell is a small data unit of

View solution

Q. Mobile telephony is an example of

View solution

Q. PVC stands for

View solution

Q. Frame Relay was originally designed to provide

View solution

Q. Frame Relay has error detection at the

View solution

Q. In Application Adaptation Layer (AAL), the payload must be segmented into

View solution

Q. The high data rate of SONET's carrier reflects the design and philosophy of

View solution

Q. Asynchronous Transfer Mode (ATM) can be the superhighway of

View solution

Q. The last bit of the Sequence number protection field of the header in Segmentation and Reassembly (SAR) sublayer is a

View solution

Q. In the Legacy ATM LANs, when two stations on two different LANs need to exchange data, they can go through a converting device that changes the

View solution

Q. The two endpoints in Asynchronous Transfer Mode (ATM) are connected through

View solution