Q. The idea of RZ and the idea of NRZ-I are combined into the ________ scheme.

View solution

Q. In _______ encoding, the duration of the bit is divided into two halves. The voltage remains at one level during the first half and moves to the other level in the second half. The transition at the middle of the bit provides synchronization.

View solution

Q. In ___________ there is always a transition at the middle of the bit, but the bit values are determined at the beginning of the bit. If the next bit is 0, there is a transition; if the next bit is 1, there is none.

View solution

Q. In Manchester and differential Manchester encoding, the transition at the middle of the bit is used for __________.

View solution

Q. The minimum bandwidth of Manchester and differential Manchester is ____ that of NRZ.

View solution

Q. In _______encoding, we use three levels: positive, zero, and negative.

View solution

Q. The _____ scheme uses data patterns of size 2 and encodes the 2-bit patterns as one signal element belonging to a four-level signal.

View solution

Q. The ______ scheme uses three levels (+V, 0, and -V) and three transition rules to move between the levels.

View solution

Q. ______ substitutes eight consecutive zeros with 000VB0VB.

View solution

Q. ______ substitutes four consecutive zeros with 000V or B00V.

View solution

Q. ASK, PSK, FSK, and QAM are examples of ________ conversion.

View solution

Q. AM and FM are examples of ________ conversion.

View solution

Q. In QAM, both ________ of a carrier frequency are varied.

View solution

Q. If the baud rate is 400 for a QPSK signal, the bit rate is ________ bps.

View solution

Q. If the bit rate for an ASK signal is 1200 bps, the baud rate is ________.

View solution

Q. If the bit rate for an FSK signal is 1200 bps, the baud rate is ________.

View solution

Q. If the bit rate for a 16-QAM signal is 4000 bps, what is the baud rate?

View solution

Q. If the baud rate for a 64-QAM signal is 2000, what is the bit rate?

View solution

Q. Given an AM radio signal with a bandwidth of 10 KHz and the highest-frequency component at 705 KHz, what is the frequency of the carrier signal?

View solution

Q. _______ conversion is the process of changing one of the characteristics of an analog signal based on the information in the digital data.

View solution