Q. Five Lakes Publishing has a Windows 2000 network serving 200 users. A server named User_srv is used to hold users' files. User_srv is configured with a single, large NTFS volume. Every user has a home folder on User_srv. Users can also use a shared folder named IN_PROGRESS to store files for books that are being prepared. The network administrator at Five Lakes Publishing configured disk quotas for the NTFS volume on User_srv. All users have a default limit of 100 MB, and the option to deny space to users who exceed their limit has been enabled. When a user named Amy Jones attempts to save a chapter of a new book to her home folder on the server, she receives the following error message: "The disk is full or too many files are open." What should Amy do to allow this document to be saved?

View solution

Q. You are the administrator of Windows 2000 Server network. On each server you format a separate system partition and a separate boot partition as NTFS. Several months later you shut down one of the computers for maintenance. When you try to restart the computer you receive the following error message "NTLDR is missing, press any key to restart". You want to install a new NTLDR file on the computer but you do not want to loose any settings you made since the installation. What should you do?

View solution

Q. You install a new multiple-process database application named Application on your Windows 2000 Server computer. Two days later, users begin to report that the new application has suddenly stopped responding to queries. You verify that the server is operation and decide that you need to restart the application. What should you do before you restart the application?

View solution

Q. You install a Windows 2000 Server computer on your network. You place several shared folders on a 12-GB primary partition formatted by FAT32. During nine months of continuous operation, the number of users who access the server and their access frequency remains constant. The average size of the files on the server remains approximately constant. After the server runs continuous for nine months, users report that the server does not retrieve files from the shared folders as fast as when you first installed the server. What should you do to resolve the problem?

View solution

Q. You are the administrator of Windows 2000 domain and TWO Windows NT domains. The Windows 2000 domains trust each of the Windows NT domains. Each of Windows NT domains trust the Windows 2000 domain. A Windows 2000 domain controller named DC1 is configured to use a highly secure domain controller template. Users in the Windows NT domain report that they cannot access DC1. You need to allow the users of computers in the Windows NT domain to access resources on DC1. What should you do?

View solution

Q. You install and run a third-party 32-bit application named Application on your Windows 2000 Server computer. After several days, the application stops responding. You open Task Manager and find that the CPU usage is at 100 percent. The normal range of CPU usage on the server is from 20 percent to 30 percent You end the application. However, you see that the CPU on the server is still at 100 percent. Task Manager shows no other applications running. You then examine the Processes page in Task Manager and confirm that the Application.exe process is no longer running. You want to return the CPU usage to its normal range. What should you do?

View solution

Q. You have just configured two Windows NT Servers, Monitor 1 and Monitor 2 with no other software installed. You have an application server that needs to be monitored for performance to figure out what it's problem is, or to get some kind of baseline. You install Network Monitor on Monitor 2. What would you do to monitor Application server?

View solution

Q. You are the administrator of a Windows 2000 Server computer. You configure the server to audit all access to files that are places in shared folders. One week after you configured the server, users report that the server has stopped responding. You investigate the problem and discover a stop error with the error message: Stop C0000244 (Audit Failed) An attempt to generate a security audit failed. You restart the computer. You need to ensure that you can keep a record of all files access on the server. You also need to ensure that the stop error will not occur again.

View solution

Q. You are the administrator of a Windows 2000 Server computer named Intra. Intra is a member of an Active Directory domain and hosts an Intranet Web-Ske for your company. Company policy requires that only authenticated users have access to the intranet site. All company users have a user account in the Active Directory domain. You configure directory security for the Web Site to use integrated security. However, you discover that users can access the Web Site without authentication. You need to ensure that only authenticated users can access the web site. What should you do?

View solution

Q. You enable the Routing and Remote Access Service (RRAS) on a computer running Windows 2000 Server. You configure the computer as a RAS server. You want to provide mutual authentication between the RAS server and RAS clients. You also want to ensure that data passing between the RAS server and RAS clients is encrypted. Which authentication method should you use for your incoming connections to support mutual authentication and data encryption?

View solution

Q. You are the administrator of a network that consists of Windows 2000 Server computers and Windows 2000 Professional computers. You want to configure the deployment of the most recent Windows 2000 service pack so that users of the Windows 2000 Professional computers receive the service pack automatically when they log on to the domain. What should you do?

View solution

Q. You are the administrator of the Windows 2000 Server network shown in the exhibit. Users in the Research group and the Executive group have permission to access the Internet through a Windows 2000 Server computer running Microsoft Proxy Server. These users must enter their proxy server user names and passwords to connect to the proxy server, to the Internet, and to your local intranet server. The users who do not access the Internet do not have user accounts on the proxy server and, therefore, cannot connect to the intranet server. You want all users to be able to connect to the intranet server without entering a separate user name and password. What should you do?

View solution

Q. Your Windows 2000 Server computer contains a stripe set with parity on a four-disk array. You convert the stripe set with parity to a dynamic RAID-5 volume. Six months later, users report that disk access on the server is slower than it had been on the previous day, You use Disk Management and discover that the status of the third disk in the array is Missing. You want to recover the failed RAID-5 volume. What should you do first?

View solution

Q. Your Windows 2000 server Computer contains data files that users of client computers access throughout the day. You install a driver for the new tape drive on the computer. After restarting the computer you log on as an administrator, shortly after you log on you receive the following stop error "irql_not_less_6r_equal". You need to bring the server back on line as quickly and reliably as possible. What should you do?

View solution

Q. Your Windows 2000 Server computer includes an integrated 10-MB Ethernet adapter. You are replacing the integrated adapter with a new 100-MB Ethernet adapter. You install the new adapter in an available PCI slot. When you restart the computer, you receive error messages in the System log stating that the new adapter Is missing or is not working. What should you do to resolve the problem?

View solution

Q. A Windows 2000 Server computer named server2 runs numerous 32bit applications and two 16bit applications. Users start the 16bit applications by running APP1.EXE for one application and APP2.EXE for another application. The 16bit applications are configured to run in the separate memory space. You want to create a performance base like chart in the system monitor for all the applications on server2. You add all of 32bit applications and now you want to add two 16bit applications. What should you do?

View solution

Q. You are installing Windows 2000 Server on a multiprocessor computer. The manufacturer has provided a customized HAL to use with the computer. The HAL is on the floppy disk. You want to install the customized HAL design for the computer. What should you do?

View solution

Q. You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers. You want to install Windows 2000 Server on a new computer. You want the new computer to act as a domain controller in the existing domain. What should you do?

View solution

Q. You are the administrator of a Windows 2000 server computer. The server has a single hard disk with two partitions. An application that runs on your server creates a very large log file in the SystemrootYTemp folder. There is not enough free space on the system partition to accommodate the log file. The application does not provide a way to change the path to the log file. You want to run the application on your server. What should you do?

View solution

Q. You want to install Windows 2000 server on 15 new computers. You want to install, configure and test all 2000 servers before shipping them to your branch offices. You want the users at the branch offices to enter the serial numbers and computer names once they receive the computers. What should you do?

View solution