Q. Each network segment must have a unique address

View solution

Q. Your 10Base2 Ethernet cable is 185 meters long. You are planning to extend your network by adding another 100 meters of cable. The total length of the cable will be 285 meters. The network uses NetBEUI. Which device should you use?

View solution

Q. Your company uses both Ethernet and token-ring LAN's in the same building. Users need access to resources and the ability to transmit data between the LAN's. Which device would you use to enable communications between dissimilar LAN's that use different protocols?

View solution

Q. Bridges offer performance improvements when used in diverse or scattered workgroups, where the majority of access occurs outside of the local segment

View solution

Q. Bridges introduce small delays into a network.

View solution

Q. Server Manager

View solution

Q. What is the purpose of the token in a network that employs a media access control method based on the IEEE 802.5 specification?

View solution

Q. With a cell-backplane architecture, the data rate on the backplane is significantly greater than the aggregate data rate of the ports

View solution

Q. As the network administrator, you create a new local group in the RESEARCH domain named R-Editors. The LAB domain trusts the RESEARCH domain. You can assign access permissions to the R-Editors group from

View solution

Q. Assume that you are a user of a Windows NT workstation in the SYCON domain, and the Windows NT workstation has local accounts. You wish to have administrative rights to all Windows NT Advanced Servers in the SYCON domain. How would you achieve this with a minimum amount of administration"?

View solution

Q. The system administrator wants to make sure that users have access only to certain programs on their systems. Which actions accomplish this?

View solution

Q. Several college interns are working at your company for the summer. You want to increase security by monitoring all user logons. How must you do this?

View solution

Q. User Manager for domains

View solution

Q. You have been given the task of installing cables for an Ethernet network in your office. The building is an older one, and-you have limited work space. In addition, the network cable will have to share the existing conduit with telephone cable, and cable segments will be up to 135 meters in length. Which cable is best suited to this installation?

View solution

Q. A Trust Relationship

View solution

Q. A cut-through switch reads the entire packet before forwarding it to the destination segment

View solution

Q. You want to install a new internal CD-ROM drive. You must first confirm that there will be no IRQ conflicts. How should you do this?

View solution

Q. Workstations connected to a port on a modern lOBase-T Ethernet HUB all use the same bandwidth, i.e. the bandwidth is shared across all available ports, the less ports, the less bandwidth available per port

View solution

Q. Fibre Optic cable is often used to

View solution

Q. Since bridges buffer frames, it is possible to interconnect different network segments which use different MAC protocols

View solution