Q. In a(n) ______ configuration, the initializing is done manually, with migrations done automatically.

View solution

Q. In a(n) _____ configuration, the stations are automatically connected or disconnected from a VLAN using criteria defined by the administrator.

View solution

Q. In a(n) _______ configuration, the administrator types the port numbers, the IP addresses, or other characteristics, using the VLAN software.

View solution

Q. VLANs create _________ domains.

View solution

Q. A ________ link acts as a LAN in a remote backbone connected by remote bridges.

View solution

Q. In a bridged LAN, the _______ algorithm creates a topology in which each LAN can be reached from any other LAN through one path only.

View solution

Q. IEEE 802.1d specification, defines _________ criteria for a transparent bridges.

View solution

Q. ________ is part of the media; its location in the Internet model is below the physical layer.

View solution

Q. _________ is just a connector.

View solution

Q. VLANs can_________.

View solution

Q. Membership in a VLAN can be based on _________.

View solution

Q. A virtual local area network (VLAN) is configured by _________.

View solution

Q. A backbone LAN is usually a ______.

View solution

Q. A _______ LAN allows several LANs to be connected.

View solution

Q. IEEE has defined the specifications for a wireless LAN, called _______, which covers the physical and data link layers.

View solution

Q. ________ uses 1550-mm single mode fiber.

View solution

Q. ________uses long-wave 1310-nm single mode fiber.

View solution

Q. ________ uses short-wave 850-nm multimode fiber.

View solution

Q. _________ uses four twisted pairs.

View solution

Q. __________uses two optical fibers and a long-wave laser source.

View solution