Q. While designing a digital system, the main objectives are

View solution

Q. There are two types of parity

View solution

Q. This is the maximum time from the start of the valid address of the read cycle to the time when the valid data is available at the data output.

View solution

Q. In a sequential memory, the words are stored in and out in a sequence.

View solution

Q. A___________ is a semiconductor memory device used to store information, which is permanent in nature.

View solution

Q. Erasing EPROM programming is accomplished by using ultraviolet light that belongs to the UVC range and has a frequency of _____________________.

View solution

Q. The EPROM eraser will emit________________ light.

View solution

Q. ________________ organization is essentially an array of selectively open and closed unidirectional contacts.

View solution

Q. The EEPROM chip is physically similar to the chip.

View solution

Q. A memory stores data for processing and the instructions for _________.

View solution

Q. Number of stored bits per unit area, which determines overall storage capacity and memory cost per bit.

View solution

Q. The _______________ of the desired memory location is applied to the address input terminals.

View solution

Q. In a sequential memory, the words are stored in and read out in a_______________ .

View solution

Q. I/O function allows to exchange data directly between an

View solution

Q. Cache memory is intended to provide memory access

View solution

Q. Data stores in

View solution

Q. Interrupts are provided primarily as a way to

View solution

Q. Index register involves adding an

View solution

Q. Program counter contains the address of the

View solution

Q. Memory modules consist of

View solution