adplus-dvertising
frame-decoration

Question

Since it is a network that uses switch, every packet goes through two links, one from source to switch and other from switch to destination. Since there are 10000 bits and packet size is 5000, two packets are sent. Transmission time for each packet is 5000 / 10^7 bits per second links. Each link has a propagation delay of 20 microseconds. The switch begins forwarding a packet 35 microseconds after it receives the same. If 10000 bits of data are to be transmitted between the two hosts using a packet size of 5000 bits, the time elapsed between the transmission of the first bit of data and the reception of the last bit of the data in microseconds is _________.

a.

1075

b.

1575

c.

2220

d.

2200

Answer: (b).1575

Engage with the Community - Add Your Comment

Confused About the Answer? Ask for Details Here.

Know the Explanation? Add it Here.

Q. Since it is a network that uses switch, every packet goes through two links, one from source to switch and other from switch to destination. Since there are 10000 bits and packet...

Similar Questions

Discover Related MCQs

Q. Which one of the following statements is FALSE?

Q. Which one of the following statements is FALSE?

Q. A serial transmission Ti uses 8 information bits, 2 start bits, 1 stop bit and 1 parity bit for each character. A synchronous transmission T2 uses 3 eight bit sync characters followed by 30 eight bit information characters. If the bit rate is 1200 bits/second in both cases, what are the transfer rates of Ti and T2?

Q. In a sliding window ARQ scheme, the transmitter's window size is N and the receiver's window size is M. The minimum number of distinct sequence numbers required to ensure correct operation of the ARQ scheme is

Q. Which one of the following protocols is NOT used to resolve one form of address to another one?

Q. Identify the correct sequence in which the following packets are transmitted on the network by a host when a browser requests a webpage from a remote server, assuming that the host has just been restarted.

Q. A firewall is to be configured to allow hosts in a private network to freely open TCP connections and send packets on open connections. However, it will only allow external hosts to send packets on existing open TCP connections or connections that are being opened (by internal hosts) but not allow them to open TCP connections to hosts in the private network. To achieve this the minimum capability of the firewall should be that of

Q. Which protocol will be used to automate the IP configuration mechanism which includes IP address, subnet mask, default gateway, and DNS information?

Q. In Go–back 3 flow control protocol every 6th packet is lost. If we have to send 11 packets. How many transmissions will be needed ?

Q. What will be the total minimum bandwidth of the channel required for 7 channels of 400 kHz bandwidth multiplexed together with each guard band of 20 kHz?

Q. Which of the following is false:

Q. The subnet mask for a particular network is 255.255.31.0. Which of the following pairs of IP addresses could belong to this network?

Q. Which of the following protocol is called as byte-oriented protocol?

Q. If syn = 0 and ack = 1, it indicates

Q. A DNS.....................server gets its data from another DNS server.

Q. The .............................field in the MIME header describes the method used to encode the data.

Q. A client message usually needs ........................ to send mail.

Q. Which one is not a method of HTTP?

Q. Which one of the following is a communication protocol used for email?

Q. Which one of the following statement about email is false?