adplus-dvertising
frame-decoration

Question

Consider a 4 bit Johnson counter with an initial value of 0000. The counting sequence of this counter is:

a.

0, 1, 3, 7, 15, 14, 12, 8, 0

b.

0, 1, 3, 5, 7, 9, 11, 13, 15, 0

c.

0, 2, 4, 6, 8, 10, 12, 14, 0

d.

0, 8, 12, 14, 15, 7, 3, 1, 0

Answer: (d).0, 8, 12, 14, 15, 7, 3, 1, 0

Engage with the Community - Add Your Comment

Confused About the Answer? Ask for Details Here.

Know the Explanation? Add it Here.

Q. Consider a 4 bit Johnson counter with an initial value of 0000. The counting sequence of this counter is:

Similar Questions

Discover Related MCQs

Q. A positive edge-triggered D flip-flop is connected to a positive edge-triggered JK flipflop as follows. The Q output of the D flip-flop is connected to both the J and K inputs of the JK flip-flop, while the Q output of the JK flip-flop is connected to the input of the D flip-flop. Initially, the output of the D flip-flop is set to logic one and the output of the JK flip-flop is cleared. Which one of the following is the bit sequence (including the initial state) generated at the Q output of the JK flip-flop when the flip-flops are connected to a free-running common clock? Assume that J = K = 1 is the toggle mode and J = K = 0 is the state-holding mode of the JK flip-flop. Both the flip-flops have non-zero propagation delays.

Q. Consider the operations f(X, Y, Z) = X'YZ + XY' + Y'Z'  and  g(X′, Y, Z) = X′YZ + X′YZ′ + XY. Which one of the following is correct?

Q. The minimum number of JK flip-flops required to construct a synchronous counter with the count sequence (0, 0, 1, 1, 2, 2, 3, 3, 0, 0,...) is ________.

Q. The number of min-terms after minimizing the following Boolean expression is _________.

[D′ + AB′ + A′C + AC′D + A′C′D]′

Q. A half adder is implemented with XOR and AND gates. A full adder is implemented with two half adders and one OR gate. The propagation delay of an XOR gate is twice that of an AND/OR gate. The propagation delay of an AND/OR gate is 1.2 microseconds. A 4-bit ripple-carry binary adder is implemented by using full adders. The total propagation time of this 4-bit binary adder in microseconds is

Q. The total number of prime implicants of the function f(w, x, y, z) = Σ(0, 2, 4, 5, 6, 10) is ________.

Q. Given the function F = P′ + QR, where F is a function in three Boolean variables P, Q and R and P′ = !P, consider the following statements.

S1: F = Σ (4, 5, 6)
S2: F = Σ (0, 1, 2, 3, 7)
S3: F = Π (4, 5, 6)
S4: F = Π (0, 1, 2, 3, 7)

Which of the following is true?

Q. What is the minimum number of NAND gates required to implement a 2-input EXCLUSIVE-OR function without using any other logic gate?

Q. Using a 4-bit 2’s complement arithmetic, which of the following additions will result in an overflow? (i) 1100 + 1100 (ii) 0011 + 0111 (iii) 1111 + 0111

Q. The number (123456)8 is equivalent to

Q. The function AB’C + A’BC + ABC’ + A’B’C + AB’C’ is equivalent to

Q. Which of the following expressions is equivalent to (A⊕B)⊕C

Q. Using Booth's Algorithm for multiplication, the multiplier -57 will be recoded as

Q. How many pulses are needed to change the contents of a 8-bit up counter from 10101100 to 00100111 (rightmost bit is the LSB)?

Q. We want to design a synchronous counter that counts the sequence 0-1-0-2-0-3 and then repeats. The minimum number of J-K flip-flops required to implement this counter is

Q. Consider a carry lookahead adder for adding two n-bit integers, built using gates of fan-in at most two. The time to perform addition using this adder is

Q. Consider an eight-bit ripple-carry adder for computing the sum of A and B, where A and B are integers represented in 2’s complement form. If the decimal value of A is one, the decimal value of B that leads to the longest latency for the sum to stabilize is _____________

Q. Let X be the number of distinct 16-bit integers in 2’s complement representation. Let Y be the number of distinct 16-bit integers in sign magnitude representation. Then X −Y is _________

Q. The addition of 4-bit, two's complement, binary numbers 1101 and 0100 results in

Q. Which of the following input sequences for a cross-coupled R-S flip-flop realized with two NAND gates may lead to an oscillation ?