adplus-dvertising
frame-decoration

Question

The number of control lines for 32 to 1 multiplexer is

a.

4

b.

5

c.

16

d.

6

Answer: (b).5

Engage with the Community - Add Your Comment

Confused About the Answer? Ask for Details Here.

Know the Explanation? Add it Here.

Q. The number of control lines for 32 to 1 multiplexer is

Similar Questions

Discover Related MCQs

Q. The logic 0 level of a CMOS logic device is approximately

Q. How many select lines will a 32:1 multiplexer will have

Q. Which of following consume minimum power?

Q. ABCD - seven segment decoder / driver in connected to an LED display. Which segments are illuminated for the input code DCBA = 0001.

Q. How many flip-flops are required to produce a divide-by-32 device?

Q. A demultiplexer can be used as

Q. 'n' Flip flops will divide the clock frequency by a factor of

Q. If the clock input applied to a cascaded Mod-6 & Mod-4 counter is 48KHz. Than the output of the cascaded arrangement shall be of

Q. Logic gates with a set of input and outputs is arrangement of

Q. A flip-flop is a binary cell capable of storing information of

Q. A device/circuit that goes through a predefined sequence of states upon the application of input pulses is called

Q. A combinational logic circuit which sends data coming from a single source to two or more separate destinations is

Q. Advantage of synchronous sequential circuits over asynchronous ones is

Q. A basic AND gate consists of ______________inputs and an output.

Q. In the AND gate, the output is ‘High’ or gate is ‘On’ only if both the inputs are ______________.

Q. It is a simple combinational digital circuit built from logic gates

Q. It is used to subtract two inputs having more than one bit

Q. It is a circuit, which subtracts two inputs each of one bit

Q. It is the converse of decoding and contains 2^n (or fewer) input lines and n output lines

Q. It directs data from input to a selected output line